{"id":3886,"date":"2021-04-27T14:16:42","date_gmt":"2021-04-27T14:16:42","guid":{"rendered":"https:\/\/www.wldsteel.com\/?p=3886"},"modified":"2025-02-24T08:20:53","modified_gmt":"2025-02-24T08:20:53","slug":"the-commonly-used-material-for-condenser-tubes","status":"publish","type":"post","link":"https:\/\/www.wldsteel.com\/nl\/het-veelgebruikte-materiaal-voor-condensorbuizen\/","title":{"rendered":"Het meest gebruikte materiaal voor condensorbuizen"},"content":{"rendered":"<p>The condenser is important auxiliary equipment in the thermal generator set.&nbsp;The condenser is generally composed of neck, casing, water chamber, tube bundle, tube plate, support rod, steam baffle, air cooling area, hot well and other parts, which is the key equipment to determine and affect the load and thermal efficiency of a steam turbine.&nbsp;The heat exchange tube, as the main heat transfer component of the condenser, is the key component of the condenser.&nbsp;With the increase of suspended solids, chloride ions and sulfur ions in the cooling circulating water, there is a higher&nbsp;requirement for a condenser cooling pipe.<\/p>\n\n\n\n<p>Condenser heat exchanger pipe should have excellent heat transfer performance, good corrosion resistance, erosion resistance and wear resistance, but also should have good strength and stiffness,\u00a0as well as economic and good processing performance.\u00a0The materials\u00a0of condenser heat exchange pipe are mainly copper alloy pipe, Austenitic stainless steel pipe, Ferrite stainless steel pipe, Duplex\u00a0stainless steel pipe, titanium and <a href=\"https:\/\/gsalloy.com\/products\/titanium-alloys\/titanium-pipe-and-tube\/\">titanium alloy pipe<\/a>. The copper alloy pipe mainly includes military\u00a0brass pipe (C26800), tin-brass pipe, aluminum-brass pipe, nickel-copper pipe, etc.\u00a0Stainless steel grades mainly include\u00a0Austenitic stainless steel tube TP304, TP316L, TP317L and Ferrite stainless steel grades TP439, TP439L, and duplex stainless steel tube 2205, 2507, titanium and titanium alloy tube mainly includes GR1, GR2, GR5, etc..<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td>Leidingmaterialen<\/td><td>Voordelen<\/td><td>Nadelen<\/td><\/tr><tr><td>Koperen buizen<\/td><td>Goede verwerkingsprestaties, matige prijs<\/td><td>Slechte tolerantie voor complexe waterkwaliteit, slechte sterkte, stijfheid, verwerkbaarheid bij het lassen.&nbsp;<\/td><\/tr><tr><td>Austenitisch roestvast staal<\/td><td>Uitstekende erosiebestendigheid, goede sterkte, plasticiteit, bewerkbaarheid en lasbaarheid.<\/td><td>Cr-Ni Austenitisch roestvast staal heeft een slechte weerstand tegen chloride-ion corrosie<\/td><\/tr><tr><td>Ferriet Roestvrij staal<\/td><td>Groot warmtegeleidingsvermogen, kleine uitzettingsco\u00ebffici\u00ebnt, goede oxidatieweerstand en weerstand tegen spanningscorrosie, ongevoelig voor chloride-ionen<\/td><td>Slechte plasticiteit en taaiheid, vooral na dieptrekken en andere grote vervorming van koude verwerking, lassen en andere plasticiteit en corrosieweerstand op hoge temperatuur aanzienlijk verminderd<\/td><\/tr><tr><td>Dupex roestvrij staal<\/td><td>Uitstekende corrosiebestendigheid, uitgebreide mechanische eigenschappen, laseigenschappen, hoge thermische geleidbaarheid.<\/td><td>Verwerking is moeilijk en de hoge kosten<\/td><\/tr><tr><td>Titanium buizen<\/td><td>Uitstekende corrosiebestendigheid, lage dichtheid, licht gewicht, goede uitgebreide prestaties.<\/td><td>Dure&nbsp;<\/td><\/tr><\/tbody><\/table><figcaption>Voor- en nadelen van verschillende materialen voor condensorslangen<\/figcaption><\/figure>\n\n\n\n<p>Different materials of the heat exchange pipe because of its own characteristics and cost factors, its application scope and working conditions are not the same.&nbsp;The corrosion in the Condenser is always an important problem in boiler accidents in power plants.&nbsp;The condensers of power plants in offshore areas generally use Cu-Zn tubes and Cu-Ni alloy tubes. The corrosion resistance of the latter is better than that of the former, because the thermodynamic stability of Ni is close to that of Cu, and the nanoscale compact and stable surface film will be generated on the surface in water or air.&nbsp;Therefore, the Cu-Ni tube in high saltwater (or seawater) and dilute acid, alkali medium is not easy to corrosion.&nbsp;But once there is an attachment on the surface of the copper tube, pitting will occur. Pitting corrosion is autocatalytic and latent, which will bring great damage.&nbsp;The condenser tube blockage and leakage frequently occur in the offshore area due to seawater backfilling, corrosion, dirt and other reasons. Yongxiang operates the generator set.&nbsp;Why is the brass condenser tube so easy to corrode?&nbsp;It depends on the type of corrosion.&nbsp;The corrosion of copper alloy condenser tube is affected by many factors, and the corrosion types are various, mainly including the following&nbsp;items:<\/p>\n\n\n\n<p><strong>Selectieve corrosie<\/strong><\/p>\n\n\n\n<p>Omdat de condensor koperen buis is meestal samengesteld uit koper zink legering, zink potentieel lager is dan koper, zodat zink gemakkelijk de anode van corroderende batterij, zodat zink selectief opgelost om de koperen buis corroderen. Uit de theorie en praktijk blijkt dat het corrosieproces van koperen buis nauw samenhangt met de prestaties van de beschermende film op het oppervlak van koperen buis. Als de initi\u00eble dichte beschermende film niet wordt gevormd, is de kans op corrosie van koperen buis groter. Als er geen initi\u00eble coatingbehandeling van FeSO4 op de koperen condensorbuis plaatsvindt, kan dit ook gemakkelijk leiden tot lokale ontzinkingscorrosie.<\/p>\n\n\n\n<p><strong>Corrosie van het elektrokoppel<\/strong><\/p>\n\n\n\n<p>Coupling corrosion may occur when two different metal materials come into direct contact in a corrosive medium.&nbsp;In the condenser, the copper alloy condenser tube material is different from the carbon steel tube sheet material in the cooling water potential, there is the possibility of galvanic corrosion between them.&nbsp;The potential of the condenser copper tube is higher than that of the tube plate, which will accelerate the corrosion of the tube plate.&nbsp;But because the thickness of the carbon steel tube plate is larger, generally 25~40mm, the galvanic corrosion won\u2019t affect&nbsp;the safe use in clean freshwater, but in the environment with a high salt concentration of water galvanic corrosion is more likely to occur.<\/p>\n\n\n\n<p><strong>Putcorrosie<\/strong><\/p>\n\n\n\n<p>Deze corrosie kan optreden op het oppervlak van de koperen buis beschermende film scheuren. Omdat het koelwater Cl en Cu oxidatie gegenereerd door Cu + onstabiele CuCl genereren, kan worden gehydrolyseerd in stabiele Cu2O, en maak de oplossing lokale verzuring thermische apparatuur corrosie. Als de koperen condensorbuis niet volgens schema wordt gereinigd, bevordert de ongelijkmatige afzetting van het oppervlak corrosie en leidt uiteindelijk tot perforatie door corrosie. In de werking van de condensor koperen buis in frequente start-stop, load change groter is, de impact van de high-speed turbine uitlaatgassen stoom, de rol van de koperen buis door wisselende stress, gemakkelijk om de messing oppervlak membraanbreuk, produceren lokale corrosie, putvorming, verminderen materiaal vermoeidheid limiet, en omdat de spanningsconcentratie op de corrosie, pitting bodem is gemakkelijk te kraken, Onder de erosie van NH3, O2 en CO2 in water, wordt de breuk geleidelijk uitgebreid.<\/p>\n\n\n\n<p><strong>Erosion&nbsp;corrosion<\/strong><\/p>\n\n\n\n<p>This type of corrosion can occur on both the waterside and the steam side, mainly in the waterside.&nbsp;Suspended solids, sand and other solid granular hard objects in circulating cooling water impact and friction on the copper tube at the inlet end of the condenser. After a long time of operation, the inner wall of the front section of the copper tube at the inlet end is rough. Although there is no obvious corrosion pit, the surface is rough, the brass matrix is exposed and the copper tube wall becomes thin.&nbsp;The anodic process of erosion and corrosion can be said to be the dissolution of copper, and the cathodic process is the reduction of O2.&nbsp;The high flow rate will hinder the formation of stable protective film, is also the cause of erosion-corrosion, the general flow rate is not more than 2m\/s.<\/p>\n\n\n\n<p><strong>NH3 corrosie<\/strong><\/p>\n\n\n\n<p>Overtollig NH3 komt de condensor binnen met stoom en concentreert zich lokaal in de condensor. Als er tegelijkertijd O2 aanwezig is, zal NH3-erosie optreden aan de stoomzijde van de koperen buis in dit gebied. Kenmerkend is het gelijkmatig dunner worden van de buiswand en NH3-erosie treedt gemakkelijk op wanneer het ammoniakgehalte in het water 300mg\/L bereikt. Het condensaat bij het baffle-gat is te koud en de opgeloste ammoniakconcentratie is verhoogd, wat ook ammoniakerosie in de koperen buis veroorzaakt.<\/p>\n\n\n\n<p><strong>Spanningscorrosie<\/strong><\/p>\n\n\n\n<p>When the condenser copper tube is not installed properly, vibration and alternating stress will occur in the operation of the copper tube surface to destroy the protective film and corrosion, finally, produce transverse crack to break the copper tube.&nbsp;This is mainly due to the relative displacement of grains inside the copper tube under the action of alternating stress, and the formation of anodic dissolution in the corrosive medium, mostly occurring in the middle of the copper tube.<\/p>\n\n\n\n<p><strong>Microbi\u00eble corrosie<\/strong><\/p>\n\n\n\n<p>Microorganisms can change the medium environment in local areas of the condenser wall and cause local corrosion.&nbsp;The electrochemical corrosion process of metal in cooling water is promoted by the biological activity of microorganisms, which generally occurs on the carbon steel tube plate at the inlet side of the condenser.&nbsp;Cooling water often contains bacteria that thrive on Fe2+ and O2, called iron bacteria, which form brown slime.&nbsp;The anoxic conditions at the bottom of the slime provided a suitable environment for the survival of anaerobic sulfate-reducing bacteria.&nbsp;The combined action of iron bacteria and sulfate-reducing bacteria promotes metal corrosion.&nbsp;Operating temperature on the high side, the corrosion scale inhibitor and water quality and operating temperature are not appropriate, inadequate dosage or concentration fluctuations in the scale, will cause the condenser tube wall local Cl &#8211; easy through scale layer, caused the corrosion of the metal matrix, and the corrosion of metal ion hydrolysis, leading to higher medium H + concentration of algae and microbial activities also cause increased acidity of medium,&nbsp;The passivation film on the metal surface is destroyed and the metal matrix is further corroded.<\/p>","protected":false},"excerpt":{"rendered":"<p>The condenser is important auxiliary equipment in the thermal generator set.&nbsp;The condenser is generally composed of neck, casing, water chamber, tube bundle, tube plate, support rod, steam baffle, air cooling area, hot well and other parts, which is the key equipment to determine and affect the load and thermal efficiency of a steam turbine.&nbsp;The heat [&hellip;]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v15.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>The commonly used material for condenser tubes<\/title>\n<meta name=\"description\" content=\"The materials of condenser heat exchange pipe are mainly copper alloy pipe, Austenitic stainless steel pipe, Ferrite stainless steel pipe, Duplex stainless steel pipe, titanium and titanium alloy pipe.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.wldsteel.com\/nl\/het-veelgebruikte-materiaal-voor-condensorbuizen\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"The commonly used material for condenser tubes\" \/>\n<meta property=\"og:description\" content=\"The materials of condenser heat exchange pipe are mainly copper alloy pipe, Austenitic stainless steel pipe, Ferrite stainless steel pipe, Duplex stainless steel pipe, titanium and titanium alloy pipe.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.wldsteel.com\/nl\/het-veelgebruikte-materiaal-voor-condensorbuizen\/\" \/>\n<meta property=\"og:site_name\" content=\"API steel oilfield pipeline, casing pipe, OCTG manufacturer and supplier\" \/>\n<meta property=\"article:published_time\" content=\"2021-04-27T14:16:42+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-02-24T08:20:53+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Geschatte leestijd\">\n\t<meta name=\"twitter:data1\" content=\"6 minuten\">\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.wldsteel.com\/#website\",\"url\":\"https:\/\/www.wldsteel.com\/\",\"name\":\"API steel oilfield pipeline, casing pipe, OCTG manufacturer and supplier\",\"description\":\"- WLD STEEL\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":\"https:\/\/www.wldsteel.com\/?s={search_term_string}\",\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"nl\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.wldsteel.com\/the-commonly-used-material-for-condenser-tubes\/#webpage\",\"url\":\"https:\/\/www.wldsteel.com\/the-commonly-used-material-for-condenser-tubes\/\",\"name\":\"The commonly used material for condenser tubes\",\"isPartOf\":{\"@id\":\"https:\/\/www.wldsteel.com\/#website\"},\"datePublished\":\"2021-04-27T14:16:42+00:00\",\"dateModified\":\"2025-02-24T08:20:53+00:00\",\"author\":{\"@id\":\"https:\/\/www.wldsteel.com\/#\/schema\/person\/759092960ae8f71841666f123d37da28\"},\"description\":\"The materials of condenser heat exchange pipe are mainly copper alloy pipe, Austenitic stainless steel pipe, Ferrite stainless steel pipe, Duplex stainless steel pipe, titanium and titanium alloy pipe.\",\"inLanguage\":\"nl\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.wldsteel.com\/the-commonly-used-material-for-condenser-tubes\/\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.wldsteel.com\/#\/schema\/person\/759092960ae8f71841666f123d37da28\",\"name\":\"WLDSTEEL\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.wldsteel.com\/#personlogo\",\"inLanguage\":\"nl\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/8e929e12167608fe50dc89bd1bfb6125?s=96&d=mm&r=g\",\"caption\":\"WLDSTEEL\"},\"sameAs\":[\"http:\/\/www.wldsteel.com\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","_links":{"self":[{"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/posts\/3886"}],"collection":[{"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/comments?post=3886"}],"version-history":[{"count":2,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/posts\/3886\/revisions"}],"predecessor-version":[{"id":4306,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/posts\/3886\/revisions\/4306"}],"wp:attachment":[{"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/media?parent=3886"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/categories?post=3886"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.wldsteel.com\/nl\/wp-json\/wp\/v2\/tags?post=3886"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}