The plastic-coated composite pipe is made of welded steel pipe as the base material, and is made by sandblasting chemical double pretreatment, preheating, plastic coating, curing, post-treatment and other processes. It has excellent comprehensive properties, strong mechanical corrosion resistance, good chemical stability and water resistance, and has functions such as corrosion resistance, pressure resistance, and […]
3PE Coating standard are ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water, ISO 21809 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems, DIN 30670 Polyethylen coatings of steel pipes and fittings. The normal bare pipe will be corroded in […]
The base material of 3PE anti-corrosion steel pipe includes seamless steel pipe, spiral steel pipe and straight seam steel pipe. The three-layer polyethylene (3PE) anti-corrosion coating has been widely used in the oil pipeline industry due to its good corrosion resistance, water vapor resistance and mechanical properties. The anti-corrosion layer of 3PE anti-corrosion steel pipe […]
According to API5L, GB/T9711.1 pipeline steel pipe performance requirements, according to the different tempering temperature, tempering can be divided into the following: 1. Low temperature tempering (150-250 degrees) The microstructure obtained by low temperature tempering is tempered martensite. The purpose is to reduce the quenching stress and brittleness of the quenched steel on the premise […]
Application: Used for gas, water and oil transportation in petroleum and natural gas industry API SPEC 5L-2011 (Pipeline Specification), developed and published by the American Petroleum Institute, is used worldwide. The main material of the tube is L245, L290, L360, L415, L480, GR.B, X42, X46, X56, X65, X70, X80, X100 and other steel grade.
1. It is generally suitable for welding of thin steel pipe below 6mm, with the characteristics of beautiful and elegant weld molding and small welding deformation.2. The maintenance gas is argon with the purity of 99.99%. When the welding current is 50-50A, the argon flow rate is 8-10L/min, and when the current is 50-250A, the […]
Galvanized pipe, also known as galvanized steel pipe, is divided into hot dip galvanized and electric galvanized. Hot dip galvanizing layer thick, uniform coating, strong adhesion, long service life. Electroplating cost is low, the surface is not smooth, corrosion resistance than hot dip galvanized pipe is poor.Galvanized steel tube: hot dip galvanized steel tube steel […]
In fact, the vessels is a big category among many steel plates, which has very special composition and many excellent properties. At present, this kind of vessels plate is mainly used to make pressure vessels in the market. For different situations and different uses, the corresponding materials to be made are also different. This kind of […]
Metal pipeline construction points for attention in winter, the biggest characteristic of winter construction I think is that the temperature is relatively low, in the welding operation must pay attention to the temperature, the need to determine the temperature of the welding position before welding, in the case of lower than the process requirements of […]
The nondestructive testing of steel mainly involves ray testing, ultrasonic testing, magnetic particle testing, penetration testing and eddy current testing. 1. Radiographic Detection (RT)X-ray testing refers to the non-destructive testing method that uses X-ray or gamma ray to penetrate the specimen and uses film as the equipment for recording information. This method is the most […]
Arabic 
English 
Dutch 
French 
German 
Italian 
Korean 
Spanish